Marmitek MEGACAM1 Bedienungsanleitung PDF herunterladen (Seite 9)

Tip: see for all possibilities www.marmitek.com

7. FREQUENTLY ASKED QUESTIONS

No image, no sound

• Check if all cables are connected properly.

• Check if the channel is set correctly.

The MegaView20 picture is interfered and all the other

channels are o.k.

There might be a TV channel too close to the selected MegaView20

channel. Choose another channel for the MegaView20 (preferably the

middle one of three or if possible five free channels).

Interference with the other channels

Choose another channel, preferably the middle of three free channels in the

band.

Distorted sound

Turn down the volume of the connected device.

Do you have any questions that are not answered here? Then check

www.marmitek.com.

8. TECHNICAL DATA

MONO RF Modulator

Power: 230VAC/50Hz, DC 9V/200mA

Standard: PAL B/G

Modulation frequency range: UHF: 471.25~855.25MHz channel 21-69

Input: Video, Audio L+R (SCART, RCA)

Output level: 72 dBµV +/- 3dB in 75 Ohm

Insertion loss: < 1,5dB at 860MHz

Carrier wave audio: 5.5MHz

Modulation method: Double side band modulation

Size: 120 x 84 x 33mm

ENGLISH

9MEGAVIEW20

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Keine Kommentare

Marmitek MEGACAM1 Bedienungsanleitung Seite 9