Marmitek AWM2 Bedienungsanleitung PDF herunterladen (Seite 3)

HOW DOES HAIBRAIN X-10 WORK?

Haibrain X-10 components use the existing mains wiring to

ommunicate (using Haibrain X-10 signals). You can build a

complete system using the three different kind of compo-

nents of the Haibrain X-10 System:

Module

s: These components will receive Haibrain X-10

signals and will switch or dim the attached lamp or

appliance.

Controllers: These components will transmit Haibrain

X-

10 signals and thus will control the Modules.

3. Transmitters: Wireless components like remotes. The

signals of these components will be received by a controller

with transceiver functionality (IRRF 7243, TM13 or console

of a

Haibrain Security System). The Transceiver will translate

the signals into Haibrain X-10 signals on the power line.

ADRESSES

Up to a maximum of 256 different addresses can be preset.

hese are subdivided into a so-called HouseCode (A to P

incl.) and a UnitCode (1 to 16 incl.). The HouseCode can

also be set on the controllers, so that the controllers and

modules become part of the same system. The address can

be set either using code dials or by pressing buttons, de-

pending on the type of module.

The Haibrain X-10 System uses standard commands, which

control all units with the same HouseCode at the same time

(e.g. all lights on, all off, etc.).

IBRAIN

1 2 3 4 5 6 7 8 ... 12 13

Keine Kommentare

Marmitek AWM2 Bedienungsanleitung Seite 3