Marmitek AWM2 Bedienungsanleitung PDF herunterladen (Seite 5)

When e.g. your conclusion is that e.g. your computer

monitor is attenuating the signal, you can use a FM10 Plug-

in Filter between the power line and the monitor to

eliminate the effects.

Known devices which can cause attenuation are:

- PC Monitors

- PCs with heavy internal power supplies

- Old Televisions

- Copiers

- Fluorescent Lights

- Gas Discharge Lamps (Energy Saving Lamps)

Some (old) devices a

re able to disturb th

e signal by

ansmitting noise on the power line. Because the

Haibrain X-10 signals are transmitted on 120 kHz, only

noise on or near this frequency will have influence on the

range. When you use a FM10 Filter to connect this device

to the power line, the noise will be filtered.

The Haibrain X-10 protocol has several mechanism to

avoid modules to

be switched on or off by other sources

than your Haibrain X-10 Controllers. However, it is possible

that the Haibrain X-10 signals are disturbed by e.g. baby

phones which are in TALK mode (continuous transmission).

When these kind of signals are present on the power line it

is possible that the Haibrain X-10 signals will not come

through.

The mains do not stop at the front door of your home.

verything that is attached to mains nearby your home can

have influence on Haibrain X-10 signals (e.g. heavy

1 2 3 4 5 6 7 8 9 10 11 12 13

Keine Kommentare

Marmitek AWM2 Bedienungsanleitung Seite 5