Marmitek SD833 Installationsanleitung PDF herunterladen (Seite 9)

If you tighten th

e screws too much, the housing will deform and you cannot get the

lid back on. Fasten the screws manually.

Replace the PCB with the Easy Lock and turn one quarter clock wi

se.

Push the PCB fully upwards, so the vertical setting is

at 8

7. Place the front.

8. The ProGuard800 has given a TAMPER ALARM for

the MS845 when placing it. Enter 1234 at the

Proguard800 when the front is placed.

Registering the Keyfob remote control

1. Go to the programming menu by pressing 9 followed by 1111

(the display now shows: MAIN MENU 1.STOP COMM.).

2. Press 9 (the display now shows: 9.PROGRAMMING 1.DEVICES).

3. Press 9 (the display now shows: 1.DEVICES 1.ZONES).

4. Press (the display now shows: 1.DEVICES 2.KEYFOBS).

5. Press 9 (the display now shows: 2.KEYFOBS KEYFOB #1).

6. Press 9 (the display now shows: 1.KF1 REGISTER TRANSMIT 1).

Now press one of the keys of the keyfob (KR814) (the display now shows: 1.KF1

display now shows: 1.KF1 REGISTER SAVE?). Press 9 to confirm. You will now

hear a long beeping sound.

7. Press 8 5 times to leave the programming menu.

8. The KR814 is now registered.

Activating the siren

When you have installed all sensors, you can re-activate the internal siren of the ProGuard800

if desired.

1. Press 9 followed by 1111

2. Press 9155 now (the display now shows: 5.WIRED SIREN DISABLED).

3. Press now (the display now shows: 5.WIRED SIREN ENABLED).

4. Press 9 to confirm.

5. Press 8 4 times to leave the installation menu.

If you open the housing of the panel or one of the sensors, the siren will now

always be activated. You can de-activate it by entering your user code on the

panel or pressing the key with the open padlock on the KR814 remote control.

Making a call

The ProGuard800 can make a call to an emergency centre or any number you choose. In this

manual we explain how you can set the ProGuard800 so it will call the number you have

chosen.

-9-

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Marmitek SD833 Installationsanleitung Seite 9